INDUSTRY DEPOT

                 Tooling & Equipment Productivity Solutions

SPEED-SET 75 DEGREE ROUGHING HEADS 

(Click for 90 Degree Lead Angles)

        FAX-IN ORDER FORM
      

Call 888-849-8034 to use PayPal

Send an e-mail

For models and sizes not appearing here or not listed on Industry Depot...Request a quote

Warranty & Return Policy

UPS Zones from this supplier

UPS to Commercial Rates

Tel. Toll Free 888-849-8034        Fax.                   416-869-0616

 

ROUGH HEAD 75 DEGREE SPEED-SET ADJUSTMENT
Speed-Set Adjustment

Problem  The cutting diameter of each insert must be individually adjusted

Solution  One synchronized adjustment sets cutting diameter perfectly for both inserts

Benefit  Faster setups and perfect incremental cutting diameter adjustments

Note:  Our large size boring heads permit double cutting inserts for faster, better balanced cutting with improved roundness and surface finish.  Click here for large heads.

Tech Tip                                 The 75º head should be used to maximize stock removal rates for thru-hole applications because it tends to self center in the existing hole, stabilizing the cut.  When the hole is shifted off center, or off angle, use the 90º lead head because it will have less tendency to follow the existing hole.

Key to Ordering by Part Number

D 22 75 400

D = finish head

22 = connection diameter

75 = approach angle

400 = insert style (or CT cartridge)

 

Bore Range    

Insert or

         
Min Max  Part No. Description Cartridge D d X1 Price*, $US Buy Now
.945" 1.181"  D 22.75.400 Rough Head - 22mm - 75° angle CCMT 21.5_ 22mm 12mm 34mm $504.00
1.142" 1.575"  D 27.75.409 Rough Head - 27mm - 75° angle CCMT 32.5_ 27mm 15mm 42mm $504.00  
1.535" 1.969"  D 32.75.409 Rough Head - 32mm - 75° angle CCMT 32.5_ 32mm 20mm 45mm $543.00
1.929" 2.559"  D 42.75.300 Rough Head - 42mm - 75° angle TCMT 32.5_ 42mm 24mm 56mm $594.00  
1.929" 2.559"  D 42.75.402 Rough Head - 42mm - 75° angle CCMT 43_ 42mm 24mm 56mm $594.00
2.283" 2.559"  D 42.75.402N Rough Head - 42mm - 75° angle CNMG 43_ 42mm 24mm 56mm $684.00  
2.48" 3.228"  D 54.75.300 Rough Head - 54mm - 75° angle TCMT 32.5_ 54mm 28mm 66mm $691.00
2.48" 3.228"  D 54.75.402 Rough Head - 54mm - 75° angle CCMT 43_ 54mm 28mm 66mm $691.00  
2.48" 3.228"  D 54.75.402N Rough Head - 54mm - 75° angle CNMG 43_ 54mm 28mm 66mm $794.00
3.15" 4.016"  D 68.75.2CT._ _ _* Rough Head - 68mm - 75° angle 2CT 75* 68mm 36mm 86mm $894.00 Please call
3.937" 4.921"  D 85.75.3CT._ _ _* Rough Head - 85mm - 75° angle 3CT 75* 85mm 50mm 100mm $1,151.00 Please call
4.921" 6.299"  D 100.75.3CT._ _ _* Rough Head - 100mm - 75° angle 3CT 75* 110mm 60mm 100mm $1,193.00 Please call
6.299" 8.661"  D 200.75.3CT._ _ _* Rough Head - 200mm - 75° angle 3CT 75* 145mm 60mm 100mm $1,451.00 Please call
8.661" 12.598"  D 300.75.3CT._ _ _W* Large Rough Head** -75° angle 3CT 75* (click here)   90mm $2,550.00 Please call
11.417" 15.748"  D 400.75.3CT._ _ _W* Large Rough Head** - 75° angle 3CT 75* (click here) 90mm $2,747.00 Please call
14.567" 19.685"  D 500.75.3CT._ _ _W* Large Rough Head** - 75° angle 3CT 75* (click here)   90mm $3,204.00 Please call
*On boring heads with cartridges you can choose the following options: 300, 402, 402 N, W06 (on 68 Ø heads type), or W08 (on 85-500 Ø heads types).            **Large head connection, click here for options.                                                                                                                                                                                      Note: All wrenches are included with each boring head.  No special tools are needed.

*For prices in Canadian currency, click item "Add to Cart" icon.  Industry Depot is.

Many more models are available.  Contact Industry Depot with your specific requirements!    

home | about us | contact us |faq| info booth | privacy policy 

Copyright © 2007 Inventory Depot, Inc. All rights reserved.