Brand name quality and 

INDUSTRY DEPOT

                 Tooling & Equipment Productivity Solutions

 

 LATHE GANG TOOL  

Installation and Setup Information

Installing and removing the CNC Quick Change Gang Tool is fast and easy.

The CNC Quick Change Gang Tool

  1. Align the toolpost on the cross-slide square with the x-axis.

  2. Slide the CNC Quick Change Gang Tool onto the tool post dovetail.  Lock in place with the tool post locking handle.

  3. Connect the machine's coolant line to the coolant inlet valve of the CNC Quick Change Gang Tool.

  4. Once the tools are installed, adjust the center height of the CNC Quick Change Gang Tool using the center height adjustment screw.  The Modular Toolholder Base provides fine center height adjustment for cut-off, and turning and facing systems.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

How to Setup

The CNC Quick Change Gang Tool

  1. Install your tools onto the CNC Quick Change Gang Tool according to your machining operations.  The  size of the workpiece will dictate the spacing between the tools and the maximum number of tools that you can use.

  2. A wide range of gang tool accessories are available for an unlimited range of machining operations.  They all use the extremely rigid, proven dovetail quick-locking system.  The CNC Quick Change Gang Tool has a Quick-Set Linear Scale for rapid tool positioning.  Modular toolholders are used for cut-off, or turning and facing of different length parts.  Slim toolholders are available for compact tool positioning for small and complicated parts that require several operations with different tools.

  3. The oversized boring bar station at the outer end is designed to hold an oversized boring bar for the sole purpose of turning and facing.

  4. Double-insert boring bars should be used to minimize the number of tools and maximize the number of operations.

  5. Assign offsets and set/touch-off each tool.  The machine is now ready to run the part program in full CNC mode.

  6. Removing the CNC Quick Change Gang Tool from the tool post leaves the machine immediately ready for other applications just a quick change tool post and toolholders.

Click for;

CNC Quick Change Gang Tool details

Victory Tool Post

Gang Tool Toolholders, details

home | about us | contact us |faq| info booth | privacy policy

     Copyright © 2007 Inventory Depot, Inc. All rights reserved.