 |
INDUSTRY DEPOT Tooling & Equipment Productivity Solutions |
|
 |
|
|
|
For models and sizes not appearing here or not listed on Industry Depot...Request a quote Tel. Toll Free 888-849-8034 Fax. 416-869-0616 ha |
Milwaukee Electric Tool 1/2 in. Hammer Drill (0-20,000 bpm) 5.5 AMP
Price
$211.83 ($CAD $239.36)
Industry Depot is
an Milwaukee Electric Tool 1/2 in. Pistol Grip Hammer-Drill
Price
$168.83 ($CAD $190.77) Industry Depot is
an Return to Page (1) Many more models are available. Contact Industry Depot with your specific requirements! |
Call
888-849-8034 to use PayPal
Milwaukee
Electric Tool 1/2 in. Hammer Drill (0-20,000 bpm) 5.5 AMP.
Product Features: • 1/2 in. capacity, 5.5 amp motor •
Trigger speed control in two ranges: 0-1000 rpm, 0-20,000 bpm,
0-2500 rpm, 0-50,000 bpm, reversing • Removable brush
cartridge-change brushes in less than one minute • 3-wire
Quik-Lok® detachable cord. For small hole drilling up to 1/2
inch the MILWAUKEE Magnum Hammer Drill is all the tool you'll
need. Lightweight, at 5-3/4 pounds, this tool is ideal for use
overhead. With two modes of operation, rotation with hammering
and rotation only, this versatile tool can be used for drilling
in steel, wood or concrete. Use Rotation Only for drilling in
steel and wood. Use Rotation with Hammering when drilling in
concrete. Dual Range Speed Control allows the operator to choose
higher speed with lower torque or slower speed and more torque
depending on the size and type of the fastener or bit and the
material being drilled. This tool can be used to drive Concrete
Screw Fasteners used in many installation operations. The Magnum
offers a unique Brush Cartridge System, storing spare carbon
brushes in the handle of the tool. Only a screwdriver is needed
to replace worn brushes. The tool is back on the job in minutes.
Equipped with an exclusive MILWAUKEE Quik-Lok Cord, the cord can
be removed for tangle free carrying and storage. It also allows
for fast field replacement of defective cordsets. Simply twist
and pull off the defective cord and push and twist on the new
cord. Includes Hammer Drill, Quik-Lok cord, side handle, keyed
chuck and depth gauge. Part No. MIL 5370-6
Milwaukee
Electric Tool 1/2 in. Pistol Grip Hammer-Drill. Product
Features:• 1/2 in. capacity, 6.5 amp motor • Trigger speed
control in two ranges: 0-1350 rpm, 0-22,000 bpm, 0-3200 rpm,
0-52,000 bpm, reversing • Hammer with rotation or rotation
only • Self-stop brush system. At 6.5 amps this Heavy Duty
Pistol Grip Hammer Drill can handle the toughest drilling of 1/2
inch holes in concrete. With Dual Range Speed Control, the
operator can choose more power to speed for the toughest
applications or more speed and less torque for lighter
applications. Equipped with a removable side handle, the side
handle also assists in setting the depth rod for pre-set hole
drilling. Use for drilling in wood, with Flat Boring Bits, Hole
Saws, Auger Bits, and Selfeed Bits. It can also be used to drill
in steel with Twist Bits and in Concrete with Percussion Bits.
Includes tool, depth gauge, side handle and keyed
chuck. Part No.
MIL 5378-20