PERMANENT LIFTING MAGNETS

INDUSTRY DEPOT

                 Tooling & Equipment Productivity Solutions

Lifting Magnets reduce back injury claims!     

Buy 2 EZ-Lift lifting magnets for $399!  Save 8%                 Click here

PERMANENT LIFTING MAGNETS (On/Off Type)

    FAX-IN ORDER FORM       U.S. or Cdn TOLL FREE: 1-888-849-8034  

         

Milwaukee Electro-Magnetic Drills   

Click to save with 

ZIPP Air Tool 2-Packs

Magnetic Deburring Machines & Media        

  

Fluke Auto Multimeters

Call 888-849-8034 to pay by PayPal

Send an e-mail

For models and sizes not appearing here or not listed on Industry Depot...Request a quote

Warranty & Return Policy

Tel. Toll Free 888-849-8034        Fax.                   416-869-0616

 

Do you need faster set-ups and safer work-handling?  

If your answer is "YES", EZ-Lift lifting magnets are for you!

From the Little EZ weighing only 5.5 lbs that can safely lift 220 lbs, with a 3.5X safety factor! (770lbs.)

    To the Big EZ that lifts up to 6,600 lbs with a 3.5X safety factor! (23,100 lbs.)

EZ-LIFT LIFTING MAGNET APPLICATIONS

Use the EZ_LIFT to move plate steel, block or round steel and iron material in your shop.  Super-powerful "rare earth" neodymium iron boron magnet requires no electricity.  It's perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc.

 

 

EZ-LIFT LIFTING MAGNET FEATURES

  • Rated for loads up to 6,600 lbs.
  • Powerful magnet tested to hold 3.5 TIMES the rated load for maximum safety.
  • Eliminates dangerous straps and slings.
  • For fast, safe, efficient loading and unloading

    

OPERATION

First center the magnet on the piece to be lifted.  Then simply move the lever to the "ON" position to engage the magnet.  Spring-loaded lock keeps magnet engaged until you release it. 

Act now!  Do set-ups in a fraction of the time and save your money! 

                        

Lever in "Off" Position                               Lever in "On" position.  Note the pin safety lock is engaged.

 No risk to you!  If not completely satisfied, you get a full 100% Money-Back refund!

 To order now, click on "Add to cart" next to the model you want.

MAXIMUM RATED LOAD PLATE STEEL

Model Maximum Plate Steel 

Rated Load (lbs)

 Minimum 

Thickness (inches)

 Maximum Plate Steel 

Rated Load (kg)

 Minimum 

Thickness (cm)

 Round Steel Price*, $USD Buy Now
Max Rated Load
lbs kg
ELM-100 220 lbs 0.59" 100 kg 1.5 cm 99 44.9 $220.00 Add to cart
ELM-300 660 lbs 0.98" 300 kg 2.5 cm 300 136 $528.00 Add to cart  
ELM-600 1,320 lbs 1.18" 600 kg 3.0 cm 600 272 $880.00 Add to cart
ELM-1000 2,200 lbs 1.57" 1000 kg 4.0 cm 990 449 $1,264.00 Add to cart
ELM-2000 4,400 lbs 2.16" 2000 kg 5.5 cm 1980 898 $2,368.00 Add to cart
ELM-3000 6,600 lbs 2.36" 3000 kg 6.0 cm 2970 1347 $3,480.00 Add to cart
Buy a 3 Lifting Magnet Set and SAVE!!!
ELM-100-3 220 lbs 0.59" 100 kg 1.5 cm 99 44.9 $596.39 Add to cart
ELM-300-3 660 lbs 0.98" 300 kg 2.5 cm 300 136 $1,485.00 Add to cart  
ELM-600-3 1,320 lbs 1.18" 600 kg 3.0 cm 600 272 $2,475.00 Add to cart
ELM-1000-3 2,200 lbs 1.57" 1000 kg 4.0 cm 990 449 $3,555.00 Add to cart
ELM-2000-3 4,400 lbs 2.16" 2000 kg 5.5 cm 1980 898 $6,660.00 Add to cart

Buy  2 ELM-100  for $399
Model Maximum Plate Steel 

Rated Load (lbs)

 Minimum 

Thickness (inches)

 Maximum Plate Steel 

Rated Load (kg)

 Minimum 

Thickness (cm)

 Round Steel Price, $USD Buy Now
Max Rated Load
lbs kg
ELM-100-2 220 lbs 0.59" 100 kg 1.5 cm 99 44.9 $399.00   Add to cart

*For prices in Canadian currency, click item "Add to Cart" icon.

Calculating Maximum Loads

Maximum lifting power is different for plate and round materials, and also depends upon carbon content of stock, stock thickness, and surface finish.

Calculation Example: ELM-600, rated lifting power is 1,320 lbs.
The formula for calculating range of lifting capacity is: T x F x M x Capacity

T = thickness, F = surface finish, M = material,

ELM-600 Example: T8, F1, and M2, 90% x 125% x 85% x 1,320 = 1,263 lbs.

  

 

 

 

 

Percent of lifting power (by thickness of material)

Thickness Depth ELM-100 ELM-300 ELM-600 ELM-1000 ELM-2000 ELM-3000
T1 2.36 in 100% 100% 100% 100% 100% 100%
T2 2.16 in 100% 100% 100% 100% 100% 100%
T3 1.97 in 100% 100% 100% 100% 95% 95%
T4 1.77 in 100% 100% 100% 100% 90% 90%
T5 1.57 in 100% 100% 100% 100% 85% 85%
T6 1.38 in 100% 100% 100% 90% 75% 75%
T7 1.18 in 100% 100% 100% 80% 65% 65%
T8 0.98 in 100% 100% 90% 70% 55% 55%
T9 0.79 in 100% 90% 75% 60% 45% 45%
T10 0.59 in 100% 70% 60% 50% 35% 35%
T11 0.39 in 70% 50% 45% 35% 25% 25%
T12 0.20 in 40% 30% 25% 20% 15% 15%

Dimensions (inches)

MODEL A B C D E F G H WEIGHT
ELM-100 4.2" 3.3" 4.7" 4.9" 2.4" 2.8" 1.6" 1.2" 5.5 lbs.
ELM-300 7.1" 6.1" 6.1" 7.3" 3.6" 3.7" 2.0" 1.6" 18.9 lbs.
ELM-600 10.0" 8.8" 8.3" 10.2" 4.5" 4.7" 3.0" 2.0" 46 lbs.
ELM-1000 11.0" 9.6" 11.3" 14.6" 6.5" 6.7" 3.8" 3.4" 101 lbs.
ELM-2000 16.6" 15.0" 13.7" 20.2" 8.5" 8.5" 4.1" 4.8" 259 lbs.
ELM-3000 22.3" 20.9" 15.7" 28.7" 8.5" 8.7" 5.8" 3.1" 399 lbs.

 

Custom Workholding without the "custom" cost! 

Click for MagVISE magnetic workholding system details to make your EZ-Lift lifting magnet even more productive.

Industry Depot is.

Many more models are available.  Contact Industry Depot with your specific requirements!

home | about us | contact us |faq| info booth | privacy policy    

Copyright © 2008 Inventory Depot, Inc. All rights reserved.