Productivity News
Volume
09-No. 2
We help you produce more for less!
|
Dear
Frederick,
At Productivity
News we're always searching
for productivity boosting tools,
equipment, instrumentation and
factory automation systems. To
save you time, product information
is concisely displayed with links to
the details you need. This is
especially true during these times
when every efficiency is essential
to keep competitive.
Recent tool
cooling developments are the topic
for this issue. Effective tool tip
cooling increases production while
improving surface finish and extends
cutting tool life. We hope
these CO2,
lathe and milling toolholder cooling
techniques will boost your shop
productivity.
|
|
|
Hard
Metal Turning Made Easy...
With
ChilAire™ Lite CO2
cooling, lubrication and
chip-extraction.
Chilaire CO2
Cooling is ideal for challenging
machining applications such as
turning diamond, carbide, hard
steels, Inconel, composites,
titanium, Nitinol, A-286, graphite,
ceramics, MMCs and CFRPs.
The ChilAire Lite system can be
readily moved between machines
depending on your hard metal
machining requirements and
conveniently stored when not in use.
Each system is complete with spray
generator, applicators and controls.
Cooling is infinitely variable in
Dry, Near-Dry, Wet and
near-Cryogenic cooling lubricating
spray modes.
Higher feed
rates, longer tool life and superior
surface finishes are yours with
ChilAire Lite CO2
cooling. And there is no fluid waste
or part stainage. ChilAire
systems are available in a range of
sizes to suit virtually any machine
tool .
More
Information
|
THRU-COOLANT
GANG TOOLS & TOOL POSTS
Dorian Victory
gang tools convert programmable
lathes into high production turning
centers featuring Thru Coolant
fittings and hardware for easy
set-ups for heavy duty turning.
Victory gang tools can be supplied
in complete sets with your selection
of tool holders, cutting tools and
inserts from a single source in a
customized package to suit your
specific needs.
More
Information
Dorian Victory
automatic Thru Coolant tool posts
and tool holders direct the
coolant exactly where it is needed
for high production CNC lathe
turning. The machine coolant
hose is attached directly to the
tool post's inlet valve for clean,
sealed coolant delivery to the
toolholder and to the cutting zone.
Thru Coolant toolholders are
available for any turning operation
along with your choice of boring
bars, cut-off blades, collets,
knurling and threading tools, drill
chucks, collets and inserts.
More
Information
|
|
CoolFLEX
TOOLHOLDERS
Techniks CAT ER 40
& 50 COLLET CoolFLEX toolholders eliminate
the need to buy both DIN B coolant and
coolant-thru holders. CoolFLEX holders
are factory set for coolant-thru the
spindle. Simply remove 2 screws for
DIN B coolant and one tool holder does
both jobs..
Collets are available for drilling,
milling, coolant thru, and high-speed
applications. Special "DNA"
Dead Nuts Accurate collets are used
for small drills (6mm and smaller) to
maintain T.I.R. for those sizes.
Each CoolFLEX
toolholder comes with a "Power
Coat" nut to increase holding
power and safety. High holding power
both extends cutting tool life and
improves surface finish. ER
collet chucks handle a wide range of
machining jobs without having to buy
new tool holders. Simply choose the
right size collet for the job, set
tool depth, and tighten the collet nut
and pull stud to the proper torque
using a torque wrench and tightening
fixure.
|
|
|
We hope you found this informative
and useful and we'd appreciate your
comments.
Sincerely,
Frederick J. Oille
Industry Depot |
|
|
| Many
More Lathe and Machining Center
Toolholding Solutions |
 |
You'll
find every conceivable tool holding
system, milling chucks, shrink-fit
extensions and machines that eliminate
handling hot tools, collets, boring
tools, collet chucks and end mill
holders.
Call
888-849-8034 to discuss any of your
special needs.
|
|
|
