|
|||
Back to Catalog Index |
ULTRASONIC THICKNESS GAUGES |
Click below for details |
|
|
CATEGORIES
MANUFACTURERS
YOUR CART
Cart
is empty
AUTHENTICATION |
Get Accurate Coating Thickness Measurements Anywhere with ... |
||||||||||||||||||||||||||||||||||||||||||||
|
NEW!
Economical Thickness Gauge Model No. UTG-1500 Ultrasonic Thickness Gauge  Our
most economical ultrasonic thickness gauge includes 5Mhz
dual sensor probe, couplant gel and carry case.
The new PHASE II UTG-1500 is a hand held microprocessor controlled ultrasonic thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces. With uses in many areas of industry, the UTG-1500 ultrasonic thickness gauge can perform precise thickness measurements on various types of raw materials, component parts and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion. The UTG-1500 ultrasonic thickness gauge is extremely easy to use. After a simple calibration to a known thickness or sound velocity, the gauge will give accurate readings in inches or millimeters. Economy Ultrasonic Thickness Gauge Ultrasonic Wall Thickness Gauge Measurement The use of Ultrasonic non-destructive testing (NDT) to check material properties such as thickness measurement, is now extensively used in all facets of industry. The ability to gauge thickness measurement without requiring access to both sides of the test piece, offers this technology a multitude of possible applications. Metals, plastics, ceramics, glass and other materials can easily be measured by portable ultrasonic thickness gauges with a common accuracy of.001". Ultrasonic thickness gauges measure the thickness of a part by measuring the time sound travels from the transducer through the material to the back end of a part, and then measures the time of reflection back to the transducer. The gauge then calculates the thickness based on the velocity of sound through the material being tested. A broad variety of piezoelectric transducers, operating at given frequencies are utilized to generate sound when excited. Typically, a 5mhz frequency is standard on all Phase II Ultrasonic Thickness Gauges. Optional transducers are always available for a myriad of applications. The direct contact method of pulse/echo type ultrasonic thickness gauges requires use of a couplant. Propylene Glycol is common, but many other substances can be used. Easy to configure and use, many gauges today have the ability to retain memory, output to printers, PC's, and handheld portable devices. With the combination of an easy menu driven gauge and the data in memory, technician/operators have a world of technology at their fingertips to obtain highly accurate and cost effective measurements for all types of thickness applications. Technical Specifications: Display type Large 4-digit LCD, Minimum display unit 0.001" / 0.1mm, Measuring range: 0.040" - 8in. (0.1mm-200mm) in steel w/standard probe (other values depending on material), Lower limit steel pipes Min. dia. 0.8in. x 0.1in. (20mm x 3mm), Display accuracy: +-0.1mm, Sound velocity range 1640 - 29,527 ft/s (500 - 9000m/s), Operating temperature 32-122 degrees F (-5 - 40 degrees C), Frequency 5MHz, Update range 4Hz. Power supply 1.5v AA alkaline batteries (4pc). Battery life Approx. 250 hours / battery set. Dimensions 4.9 x 2.6 x 0.9in. (161x 69 x 32mm). Weight 0.7lbs (300g), Operating current <20mA (3V) Table of basic sound velocity of various materials. Material Sound velocity (m/s): Aluminum 6260, Iron 5900, Copper 4700, Brass 4640, Zinc 4170, Silver 3600, Gold 3240, Tin 3230, Glass 2350 The UTG-1500 Ultrasonic Thickness Gauge comes complete with compact durable carry case, 5MHz probe, coupling gel and operation manual. |
Most
Popular! Loaded with features Model No. UTG-2800 Ultrasonic Thickness Gauge  Our
most popular ultrasonic thickness gauge is loaded with
features such as scan, Min/Max setting and USB Output and
includes 5Mhz dual sensor probe, couplant gel, software
and rugged carry case.
Most Popular! Loaded with features Model No. UTG-2800 is our most popular ultrasonic thickness gauge and is loaded with features such as scan, Min/Max setting and USB Output and includes 5Mhz dual sensor probe, couplant gel, software and rugged carry case. State of the art, digital ultrasonic thickness gauge is packed with features typically found on high end models only. This multi-functional ultrasonic thickness gauge offers everything from basic measurement, Scanning Capabilities, Adjustable Sound Velocity, extended memory and USB output capabilities. This dynamic ultrasonic thickness gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2800 ultrasonic thickness gauge will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity. Specifications: Display type 4-digit LCD w/Back Light, Minimum display unit 0.001"/0.01mm (selectable), Measuring Range 0.02-12.0" in steel w/standard probe, Accuracy +/- (0.5% thickness + .001"), Sound velocity range 3280-32805 ft/s (1000-9999m/s), Upper/Lower Limit Preset Alarm Yes, Operating temperature 32-122 degrees F, Frequency 5MHz, Update range 4Hz, Memory 20 Groups (100 files/group), Output USB, Mini-Printer Optional: Power supply 3v AA alkaline batteries (2pc), Battery life Approx. 100 hours (w/backlight off), Power consumption Working current is less than 3V, Dimensions 5.90" x 2.91" x 1.30" (150 x 74 x 33mm). Weight 8.6oz (245g) Ultrasonic thickness gauges UTG-2800 ultrasonic thickness gauge comes complete with Certificate of Calibration, Operation Manual and Custom Carry Case.
|
||||||||||||||||||||||||||||||||||||||||||||
|
Surface Roughness Tester Measurement Guide Surface roughness, for purposes of this forum, is the result of some machining process and its effect on the material surface in question. Skid type surface roughness testers are common instruments used on the shop floor. A diamond stylus is traversed across the specimen and a piezoelectric pickup records all vertical movement. Peaks and valleys are recorded and converted into a known value of a given parameter. Parameters differ in how they approach looking at peaks and valleys. The most popular parameter is "Ra". Ra is commonly defined as the arithmetic average roughness. While the Ra parameter is easy and efficient, there are other parameters that can be more specific and useful depending on the application requirements. It is the parameters that enable us to define surface roughness. Today, for the purpose of checking Ra values, the use of portable, hand held, surface roughness testers are not only economical, but are digital and easy to use. These surface roughness testers are a given necessity for any shop floor that receives work with Ra requirements.
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Test
thru Coatings! Model No. UTG-2600 Ultrasonic Thickness Gauge  Thru
Coating Technology! The
UTG-2600 is a versatile
ultrasonic thickness gauge
that includes 5Mhz dual
sensor probe, couplant gel
and rugged carry case with
Thru Coating Capabilities
Model No. UTG-2600 is a state of the art, digital ultrasonic thickness gauge is capable of reading wall thickness thru coatings and paint without affecting the measurement and is packed with the most popular features including basic measurement, Scanning Capabilities, Adjustable Sound Velocity, and extended memory capabilities. This dynamic ultrasonic thickness gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2600 ultrasonic thickness gauge will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity. Specifications: Model No. UTG-2600, Display type 4-digit LCD w/Back Light, Minimum display unit 0.003 (if>3.93"), 0.0003" (if<3.93"). Measuring Range: Standard Mode: 0.03-8.0" in steel, Thru Coating Mode: 0.118" - .905" 3.0 -23mm) w/standard probe. Accuracy +/- 1%xH + 0.0007" (H=displayed value). Sound velocity range 3280-32805 ft/s (1000-9999m/s). Upper/Lower Limit Preset Alarm Yes, Operating temperature 32-122 degrees F. Frequency 4MHz. Update range 4Hz. Memory 500 Test Values. Mini-Printer Optional, Power supply 3v AA alkaline batteries (2pc), Battery life Approx. 100 hours (w/backlight off), Power consumption Working current is less than 3V. Dimensions 5.86" x 2.87" x 1.25" (149 x 73 x 32mm). Weight 5.6oz (160g) UTG-2600 ultrasonic thickness gauge comes complete with Certificate of Calibration, Operation Manual and Custom Carry Case. |
Test
steel
thickness
from
0.01"
and
up! Model No. UTG-2650 Ultrasonic Thickness Gauge  Ultra
Precise!
The
UTG-2650
is a
versatile
ultrasonic
thickness
gauge
that
reads
out in
0.0001”
resolution
and
includes
5Mhz
dual
sensor
probe,
couplant
gel
and
rugged
carry
case.
State of the art ultrasonic technology allows you to obtain ultra precise thickness measurements and store them to memory. This digital tester is capable of reading wall thickness down to 0.010" with a super high adjustable resolution of up to 0.0001". This dynamic sonic gauge is designed to measure the thickness of metallic and non-metallic materials such as steel, aluminum, titanium, plastics, ceramics, glass and any other good ultrasonic wage conductor as long as it has parallel top and bottom surfaces. The UTG-2650 will accurately display readings in either inch or millimeter after a simple calibration to a known thickness or sound velocity. Specifications: Model No. UTG-2650: Display type 4-digit LCD w/Back Light, Display Resolution Inch: 0.01", 0.001" or 0.0001" (selectable) Metric: 0.1mm or 0.001mm (selectable), Measuring Range Standard Mode: 0.010" - 0.787" (steel). Accuracy+/-0.0002" (0.005mm) if thickness < 3mm +/-0.002" (0.05mm) if thickness < 20mm, Sound velocity range Upper/Lower Limit Preset Alarm Yes. Operating temperature 32-122 degrees F. Refresh Frequency 4MHz up to 25MHz. Memory 500 Test Values, Output N/A. Power supply AA alkaline batteries (2pc), Battery life Approx. 200 hours (w/backlight off). Power consumption Working current is less than 3V. Dimensions 5.86" x 2.87" x 1.25" (149 x 73 x 32mm). Weight 5.6oz (160g) Ultrasonic thickness gauges UTG-2650 comes complete with Certificate of Calibration, Operation Manual and Custom Carry Case. |
||||||||||||||||||||||||||||||||||||||||||||
|
Simplicity!
Up
to
8"
thick
steel Model No. UTG-2000 Ultrasonic Thickness Gauge  Very
compact,
easy
to
use
touch
and
read
ultrasonic
thickness
gauge.
UTG-2000
includes
5Mhz
dual
sensor
probe,
couplant
gel
and
carry
case.
Model No. UTG-2000 is a very compact, easy to use touch and read ultrasonic thickness gauge. UTG-2000 includes 5Mhz dual sensor probe, couplant gel and carry case.State of the art, digital Ultrasonic Thickness Gauges are menu driven, multi-functional units offering everything from the basic measurement to extended memory and RS 232 output capabilities. This dynamic series of gages are designed to measure the Thickness of metallic and non-metallic materials such as aluminum, titanium, plastics, ceramics, glass and any other good Ultrasonic wave conductor as long as it has parallel top and bottom surfaces. The UTG-2000 series gages will accurately display readings in either inch or millimeter after a simple calibration to a known Thickness or sound velocity. Dynamic series of gauges give you the ultimate choice in Ultrasonic Thickness Measuring! Ultrasonic thickness gauges portable digital & Ultrasonic Wall Thickness Gauge Measurement The use of Ultrasonic non-destructive testing (NDT) to check material properties such as thickness measurement, is now extensively used in all facets of industry. The ability to gauge thickness measurement without requiring access to both sides of the test piece, offers this technology a multitude of possible applications. Metals, plastics, ceramics, glass and other materials can easily be measured by portable ultrasonic thickness gauges with a common accuracy of.001". Ultrasonic thickness gauges measure the thickness of a part by measuring the time sound travels from the transducer through the material to the back end of a part, and then measures the time of reflection back to the transducer. The gauge then calculates the thickness based on the velocity of sound through the material being tested. A broad variety of piezoelectric transducers, operating at given frequencies are utilized to generate sound when excited. Typically, a 5mhz frequency is standard on all Phase II Ultrasonic Thickness Gauges. Optional transducers are always available for a myriad of applications. The direct contact method of pulse/echo type ultrasonic thickness gauges requires use of a couplant. Propylene Glycol is common, but many other substances can be used.Easy to configure and use, many gauges today have the ability to retain memory, output to printers, PC's, and handheld portable devices. With the combination of an easy menu driven gauge and the data in memory, technician/operators have a world of technology at their fingertips to obtain highly accurate and cost effective measurements for all types of thickness applications. Performance Parameters: Display type 4-digit LCD, Minimum display unit .001"/0.01mm, Measuring Range 0.04-8.0" in steel w/standard probe, Display accuracy 0.001" / 0.01mm, Sound velocity range 3280-32805 ft/s (1000-9999m/s). Operating temperature 32-122 degrees F, Frequency 5MHz, Update range 4Hz, Power supply 1.5v AAA alkaline batteries (2pc), Battery life Approx. 250 hours/set. Power consumption Working current is less than 3V Dimensions 4-1/4 x 2-3/8 x 1". Weight 4.7oz Dimensions 4-1/4 x 2-3/8 x 1". Weight 4.7oz |
Simplicity
with
external
mini
printer! Model No. UTG-2020 Ultrasonic Thickness Gauge Very
compact
and
easy
to
use,
the
2020
ultrasonic
thickness
gauge
has
memory,
RS232output
and
includes
mini-printer,
5Mhz
dual
sensor
probe,
couplant
gel
and
rugged
carry
case.
printer! Model No. UTG-2020, a very compact and easy to use ultrasonic thickness gauge. The 2020 ultrasonic thickness gauge has memory, RS232output and includes mini-printer, 5Mhz dual sensor probe, couplant gel and rugged carry case. The Model No. UTG-2000: standard unit has measuring capabilities only. Model No. UTG-2020: standard unit incorporates vast memory functions, mini-printer, PC cable, charger, operations manual.
|
||||||||||||||||||||||||||||||||||||||||||||
Basic
Touch
and
Read! Model
No.
UTG-1000
Ultrasonic
Thickness
GaugeCompact and easy to use touch and read ultrasonic thickness gauge. UTG-1000 includes 5Mhz dual sensor probe, couplant gel and carry case. The PHASE II SRG-1000 Surface Roughness Tester is a pocket-sized economically priced instrument for measuring surface texture conforming to traceable standards. It can be used on the shop floor in any position, horizontal, vertical or anywhere in between. The large LCD display shows either Roughness parameter Ra or Rz at the touch of a button, combined with the selected cutoff length. External calibration of the Roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user about each individual measurement status when ready. The easy to use SRG-1000 operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80x 30mm. The areas of application are wide spread. It is suitable for inspection departments, quality control, on the shop floor during machining, during assembly, and on site. The SRG-1000 determines both Roughness parameters Ra and Rz within a wide measuring range (see specifications below). The piezo-electric pick-up stylus with diamond tip assures a very reliable measurement within tolerances that conform to ISO class 3. Roughness parameter Ra is computed to conform to ISO and Rz is computed to conform to DIN. Technical Specifications: Roughness parameter Ra (ISO), Rz (DIN), Measuring range Ra: 0.05-10.0µm / Rz 0.1-50µm. Cut-off lengths 0.0009in, 0.03in, 0.09in. Filter RC analogue. Tracing length 0.23in (6mm). Tracing speed 0.04in/second (1.0mm/second). Accuracy Conform ISO Class 3. Pick-up stylus Piezo-electric. Tracer tip Diamond, radius 10µm +- 2.5µm. Operating temperature 32-104 degrees F (0-40 degrees C). Power 3.6v / 2xNiMh batteries. Charger 9V DC. Contact force on probe <1.8ozf (<50gf). Static measuring force of sensor stylus <0.06ozf (<1.6gf). Dimensions 4.9 x 2.8 x 1.0in (125 x 73 x 26mm). Weight 0.4lbs (200g) The PHASE II SRG-1000 Roughness Tester comes complete with a compact durable carrying case, roughness standard, charger and instruction manual. |
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
ULTRASONIC THICKNESS GAUGE ACCESSORIES
Click for Bench Hardness Testers Click for Portable Hardness Testers Click for Durometers |
|||||||||||||||||||||||||||||||||||||||||||||
|
Productivity improvement, project management & product development |
CONTRACT MANUFACTURING Components, Equipment, Electronics and more! |
PRODUCTIVITY
NEWS
E-letter
Back Issues For your free copy Register
|
| INDUSTRY DEPOT LINE CARD | ||
|
home | about us | contact us |faq| info booth | privacy policy |
||
|
Copyright © 1999-2012 Inventory Depot, Inc. All rights reserved. |
||
E-commerce
business
and
online
market
development